Alu/Alu
blister packing machine KDB-120ALU(Automatic
Blister Packing Machine) is specially designed for
the ALU/ALU product for
the purpose of better preservation and prevention of light rays.
KDB-120ALU has similar features
with KDB-120 except it's formed by cold extruding. It can also
pack ALU/PVC's product.
|
 FLOW
CHART
KDB
MACHINE
Sealing Line (cross-net
type) |
|
TRADITIONAL
MACHINE
Sealing Dot (plate
type) |
|
|
|
|
Cross-net
type roller,due to crossed net sealing is capable
of blocking the air completely and prolonging medicine
preservation about 4 times over plate type sealing.
The cross-net type roller is composed of two rollers
compressed in a single line with a very small contact
area preventing hot air from getting into the blister
pockets,so medicine effectiveness is unaffected. |
|
Dot
type (plate-type)
Plate type uses dot-type sealing:air gets into the
medicine where there aren't dots and thus
shortens expiration.
Since the sealing area is larger and sealing time
longer, during the sealing process, hot air easily
gets into the blister pockets. This decreases the
effectiveness of the medicine. |
|
|
|
|
|
|
The
machine adopts a no waste cut method, so no wasted
material is
produced. It can save
about 1/5 of material compared to traditional types.
|
|
Plate-type
of triming wastes about 3-5 mm of material between
two blister and increases cost at the same time. |
| OPTION |
|
|
|
|
Automatic
Feeding Device
For Capsule & Tablet:
The capsule or tablet can
be filled 100% automatically
into blister pocket by
vibrating feeder. |
|
|
|
Automatic
orientation device
for capsule (capsule only):
Automatically fill the two
piece hard capsule into the
blister pocket at same
direction by capsule
orientation structure. |
Brush
Box feeder
Easy to feed all diffent
kinds of products into the
blister pocket with brushes. |
|
Miss-Feeding
Detecting
System:
Capable of detecting
miss-feeding blister by
detecting system.
|
| SIZE
CHANGE PARTS |
|
FEATURES:
|
1.
|
Compact
size with all function and fast production. |
|
2.
|
Compressed
air forming creates equivalent blister pocket. |
|
3.
|
Continuous
motion offers best filling condition. |
|
4.
|
Equipped
with trouble detection system which displays
where the trouble is. |
|
5.
|
The
machine adopts a no waste trimming method
to save material. |
|
6.
|
It
is very easy to exchange all the size change
parts. It takes less than 30 minutes to finish. |
|
7.
|
Main
frame is covered with stainless steel. This
makes it easier to clean and meets cG.M.P.
standard. |
|
8.
|
It
is neither noise nor creates public hazards
and it is easy to operate. |
|
9.
|
The
expiration is about 4 times longer than traditional
dot-type sealing. |
|
| |
|
TECHNICAL
DATA
|
Output |
Max.
100 blisters/min |
|
Forming
film thinkness |
0.25~0.4
mm(PVC) |
|
Film/foil
width |
Max.
140mm |
|
Forming
depth |
Max.
8mm |
|
Formed
area available |
Max.
146 x125mm |
|
Reel
diameter PVC
film |
Max.Ø500mm
|
|
Reel
diameter ALU
foil |
Max.Ø320mm |
|
Reel
core |
Ø70~Ø76mm |
|
Power
supply |
220V/380V/415V
50Hz/60Hz, 3 phase |
|
Power
consumption |
6~7
KW |
|
Compressed
air consumption |
6
KG/CM2(bar), 150L/min |
|
Cooling
water consumption |
27~31L/HR,
15°C~20°C |
|
Forming
materials |
ALU/ALU,PVC/ACLAR,PET
PVC,PP,PVC/PVDC |
|
Foil
materials |
ALU/HARD,ALU/SOFT
ALU/PAPER,ALU/POLYESTER,PP |
|
PACKING
DATA
|
Machine
dimension (LxWxH)
|
260
x 105 x 190 (cm) |
|
Packing
size |
285
x 135 x 205 (cm) |
|
Net
Weight |
1000
kgs |
|
Gross Weight |
1400
kgs |
|
|
|
◎ The specification,
appearance and dimensions shall be subject to change
without prior notice.
◎ Other KD machine series please browse our website
check to detail.
|
|
|
|
|
|
|
|
|
|
|
|
