Kwang
Dah Enterprises Co., Ltd. started to research and manufacture
Phamaceutical Machines and
the KDB series of Blister Packing Machine since 1971.The KDB-120
series of blister Packing Machine
offer flexibility that can satisfy a very wide range of products
. It can be used for the pharmaceutical
packing(tablets,capsules,pills and etc.), food and other similar
products packing.
Kwang Dah has designed and improved the traditional blister
packing machine after many years of
experience with manufacturing and based on the trends of pharmaceutical
machinery in the world.(With
the concept of CGMP, packing needs to be preserved longer; the
packing method should not have any
influence on the effectiveness of the medicine.)In this series
there is the Mid-speed KDB-120 that can
produce max.200 blisters/min.,and the High-speed double line
KDB-240 that can produce max. 400
blisters/min. Flat plate & compressed air forming offer
the best package quality minimize film shrinkage
and bring about uniform wall thickness and good appearance.
It uses a cross-net type roller for hot sealing, resulting in
a beautiful appearance and better seal-up ability.
The temperature will not affect the medicine that can over 4
times longer than plate-type hot sealing .
Hot-pressed embossing and perforation are easily adjustable
and the settings enable easy separation and beautiful apppearance.
Trimming by a precise Index,no waste packing material gets between
two processed blisters and saves
cost of materials.
FLOW
CHART
KDB
MACHINE
Sealing Line (cross-net
type)
TRADITIONAL
MACHINE
Sealing Dot (plate
type)
Cross-net
type roller,due to crossed net sealing is capable
of blocking the air completely and prolonging medicine
preservation about 4 times over plate type sealing.
The cross-net type roller is composed of two rollers
compressed in a single line with a very small contact
area preventing hot air from getting into the blister
pockets,so medicine effectiveness is unaffected.
Dot
type (plate-type)
Plate type uses dot-type sealing:air gets into the
medicine where there aren't dots and thus
shortens expiration.
Since the sealing area is larger and sealing time
longer, during the sealing process, hot air easily
gets into the blister pockets. This decreases the
effectiveness of the medicine.
The
machine adopts a no waste cut method, so no wasted
material is
produced. It can save
about 1/5 of material compared to traditional types.
Plate-type
of triming wastes about 3-5 mm
of material between two blister and increases cost
at the same time.
OPTION
Automatic
Feeding Device
For Capsule & Tablet: The capsule or tablet can
be filled 100% automatically
into blister pocket by
vibrating feeder.
Automatic
orientation device
for capsule (capsule only): Automatically fill the two
piece hard capsule into the
blister pocket at same
direction by capsule
orientation structure.
Brush
Box feeder Easy to feed all diffent
kinds of products into the
blister pocket with brushes.
Miss-Feeding
Detecting
System: Capable of detecting
miss-feeding blister by
detecting system.
SIZE
CHANGE PARTS
FEATURES:
1.
Compact
size with all function and fast production.
2.
Compressed
air forming creates equivalent blister pocket.
3.
Continuous
motion offers best filling condition.
4.
Equipped
with trouble detection system which displays
where the trouble is.
5.
The
machine adopts a no waste trimming method
to save material.
6.
It
is very easy to exchange all the size change
parts. It takes less than 30 minutes to finish.
7.
Main
frame is covered with stainless steel. This
makes it easier to clean and meets cG.M.P.
standard.
8.
It
is neither noise nor creates public hazards
and it is easy to operate.
9.
The
expiration is about 4 times longer than traditional
dot-type sealing.
FLOW
CHART
