|
|
|
[ Company Profile ] |
[ Product Profile ] |
[ Contact Us ] |
[
Home ] |
| Home>Main Products>Capsule Filling Machine Series |
KDF-9
/ 18
Automatic Capsule
Filling Machine
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
GENERAL:
KWANG DAH
has specialized in design and manufacture of capsule series
machines since 1971.
Automatic Capsule Filling Machine has been designed and
developed to fill hard gelatin capsules with powder or pellets.
It is an extremely durable and reliable machine that fills
dosages to the highest accuracy. It can be applicable to the
widest range of capsules at all sizes and to all manufacturers
and guarantee the integrity of all capsules |
||||||||||||||||||||||||||
| FEATURES: | ||||||||||||||||||||||||||
|
1.
|
The housing and surface are covered with stainless steel 304. All contact parts of medical powders are made from a corrosion resistant stainless steel 316 ,meeting the standards of cG.M.P or FDA approved material. | |||||||||||||||||||||||||
|
2.
|
Capable of filling 9/18 capsules at a time with operation from 10 stations. Accurate operation for orientation, opening, filling, joining and ejecting of the capsules. | |||||||||||||||||||||||||
|
3.
|
Better Accuracy, Average output around 7200/120,000 capsules per hour. Highest Efficiency. | |||||||||||||||||||||||||
|
4.
|
Safety Sensing System to shut the machine down automatically in the event of problems when no capsules, no powder, door is opened, and abnormal load for the machine are detected. | |||||||||||||||||||||||||
|
5.
|
The machine conforms to cGMP standards. | |||||||||||||||||||||||||
|
||||||||||||||||||||||||||
| TECHNICAL DATA: Suitable for capsule # 00 ~ #4 | ||||||||||||||||||||||||||
|
1.
|
After capsules
arranged and oriented, put capsule into the mold and open it by
vacuum carrier segment holds 9/18 empty capsules. |
|||||||||||||||||||||||||
|
2.
|
Open capsules once
again to ensure the capsule to be opened. |
|||||||||||||||||||||||||
|
3.
|
The upper holder starts retracting while the lower proceeds to the dosing station. | |||||||||||||||||||||||||
|
4.
|
Complete retraction
of the upper holder is done at this station. |
|||||||||||||||||||||||||
|
5.
|
Reclaim the powder
which not being filled into the capsules from the collector. |
|||||||||||||||||||||||||
| 6. |
Eject the unopened
capsule and the faulty by vacuum system |
|||||||||||||||||||||||||
| 7. |
Upper holder starts
moving outward to the position above the lower holder. |
|||||||||||||||||||||||||
| 8. |
Join capsules
together by lower closing pins. |
|||||||||||||||||||||||||
| 9. |
Eject the filled
capsule into the collection container. |
|||||||||||||||||||||||||
| 1 | 0. | Clean the residue powder attached to cap and body mold by suction for next cycle use. | ||||||||||||||||||||||||
| TECHNICAL DATA: Suitable for capsule # 00 ~ #4 | ||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
| Capsule Filling Machine Series | |
|
[ Company Profile ]
|
[
Product Profile ]
|
[
Contact
Us ]
|
[
Home ]
|