Pharmaceutical Machine

[  HOME  ]
PRODUCT PROFILE  ]
CONTACT US  ]

  

  

  

 

Home>Main Products>Capsule Filling Machine Series


KDF-2HA Semi-Automatic Capsule Filling Machine (Horizontal Type )


Semi-Automatic Capsule Filling Machine

 

GENERAL:
This equipment is a new model horizontal semi-automatic capsule filling machine KDF-2HA developed by Kwang Dah.
This model can choose the number of turns and speed when filling, and the operation is simpler, also more accurate and Safe, for filling powders and granules (round granules) with good fluidity, greatly improving its efficiency and reducing capsule loss rate. In addition, it is easier to clean and maintain and meet the requirements of cG.M.P. and PIC/S.


It is suitable for small and medium pharmaceutical factories, health care products factories, and hospital preparation rooms.

 
FEATURES:
1. The casing, tabletop and powder hopper of the whole machine are all made of stainless steel, conforming to cG.M.P. standards.
2. There is no baking varnish treatment on the machine surface, so it can avoid the baking varnish falling off, mixing into the powder, and then filling into the capsule.
3. Separate power and fixed-point filling make the filling volume very accurate.
4. 100% capsule filling, no loss or waste of any capsule.
5. Special design, using different types of capsules, easy change mold (within 20 minutes).
6. Simple structure, easy maintenance and simple cleaning.
7. No noise, easy to operate, you can fully learn to operate within ten minutes.
8. This machine has a forced filling device, especially for the powder with poor fluidity, it can be filled many times to achieve accurate weight.
9. Applicable to various powders and granules (round granules).
10. When the rotating disk is aimed at tighter capsules, it can rotate more times to separate capsule caps and bodies.
11. The speed of powder filling can be adjusted.
 
 

OPERATIONS: There are 3 stations in the KDF-2HA and they are as follows.

THE FIRST STATION:ORIENTATION OF CAPSULE
The function of first station includes capsule feeding, aligning and insertion into bores of holding ring . Also, vacuum is used for separating capsule cap and body in first station.
After orientation of capsule, capsule cap can stay in upper holding ring and capsule body can stay in lower holding ring.

 

THE SECOND STATION:POWDER FILLING
Separate the holding ring, put the lower (capsule  body) holding ring on the rotary table, pull the powder hopper over the lower (capsule body) holding ring, then auger inside powder hopper starts to run and fill powder into the capsule body.
While Iower holding ring turns one cycle, push powder hopped to its original opsition.

 

THE THIRD STATION:CAPSULE CLOSING
Put upper holding ring and lower holding ring together, then take the holding ring ahead of ejector and aim ejector at the bores of holding ring. Pushing the ejector under the operating table. Then using air cylinder to push ejector and let it press the capsules for closing.
Pull out the ejector, and finally pouring the
finished capsules into container.
 
OTHER PRODUCTS
1.
Auto capsule filling machine.
2.
Batch counter.
3.
Auto strip pack machine.
4.
Auto blister pack machine.
5.
Capsule polishing machine
6.
Capsules/tablets inspection machine.
7.
Auto count & container feeding machine.
8.
Automatic soft gelatine capsule making machine.

APPLICABILTY
1.
Can fill capsule sizes 00-0-1-2-3-4-5.
2.
Can fill material in either powder or granule forms.

TECHNICAL DATA:

Capacity

Max. 25,000 pcs/hr

Power Supply

AC 220/380V, 50/60 HZ, 3P

Air Consumption

6 kg/cm2, 125 l/min

Power Consumption

2.5 kw

Machine Size (LxWxH)

150 x 100 x 160  cm

Packing Size (LxWxH) 

190 x 120 x 180 cm

Net Weight

600 kgs

Gross Weight

740 kgs

 

    ◎ The specification, appearance and dimensions shall be subject to change without

          prior notice.
    ◎ Other KD machine series please browse our website check to detail.

                                            

Product Series

Counting Machine Series

Liquid Filling Machine Series

Other Machine Series

Packaging Material

Powder Processing Machine

Other Manufacturer Machine

 

 

[ Home ]

 


http://www.kd-machine.com (Try this webside)

If you don't know which machine you need ↑↑

E-mail: kd033512@gmail.com  We'll reply your enquiry within 24hrs.

TEL:886-2-29713333,886-2-29818888 FAX:886-2-2982-6645

No.17. Lane 32, Gengzhou Rd., Wugu Dist., New Taipei City, 24874. Taiwan.